Jandel Cylindrical Four Point Probe

Cylindrical four point probe head

Jandel Engineering Limited manufactures the cylindrical four point probe head to be compatible with the Jandel Multiposition Wafer Probe, the Microposition Probe, the Multiheight Probe, The Multiheight/Microposition Probe, as well as some OEM mapping systems.
It can be built into customer engineered four point probe systems using an optional mounting adapter which Jandel offers.
All Jandel probes are built to a high level of mechanical accuracy. Specifications for radii, spacing and planarity are verified by video inspection system and optical interferometer. Loads are verified by electronic force gauge. Each probe has upper and lower jeweled needle guides.

Category:

Description

Probe pressure adjustment

The cylindrical probe has an adjustable load in one of three ranges.
The ranges are: 10-30g, 30-60g, and 60-150g.
Within a range the load is adjusted by turning the pressure adjustment screw clockwise. The load indicator goes clockwise from ‘L’ (low load) round to‘H’ (high load).
Optimum probe pressure
The probe has a plastic insulating pad on the nosepiece.
It is intended that this pad is in contact with the measured sample when a measurement is being made. This ensures that the needles are retracted the correct distance and that the optimum indicated load is achieved.