Description
Assembly Rods
Precision ground finish
M3 tapped holes at both ends
| Model No: | Length ( mm ) | |
| CGRD-CG-50 | 50 | |
| CGRD-CG-75 | 75 | |
| CGRD-CG-100 | 100 | |
| CGRD-CG-150 | 150 | |
| CGRD-CG-200 | 200 | |
| CGRD-CG-250 | 250 |
Optic Plates
Through Threaded Optic Plate
1″ / 25 mm Stepped Bore Optic Plate – Threaded Type
25 mm Unthreaded Optic Plate
30 mm Unthreaded Optic Plate
End Plate
End Plate
Kinematic Optic Plate
Translators are used for moving optics in Kinematic, XY and Z Directions, All translators are having 25 mm bore and are suitable for mounting optics, accessories and adapters having 25 mm size.
| Model No: | Optice size | Type | |
| M-KM-25 | Ø 25 mm | Through bore thread | |
| M-TKM-25 | Ø 25 mm 1″ | HM1 |
Course Rotator
Model : M – PMR 25
Translators
XY Translator
Model : M – TR – XY25
Compatible with rod assembly
2 mm travel X&Y Axis
Micrometer drive
25 mm diameter optics holder
Optics held by grub screws
Z Translator
Model : M – TR – Z25
Compatible with rod assembly
6 mm travel
Micrometer drive
25 mm diameter optics holder
Optics held by grub screws
Cube Accessories
Cube Prism Holder
25mm cube prism can be placed inside the cube using this prism holder. Nylon tipped set screws are used to fix the prism to the cube prism holder. The holder can be rotated manually and locked with an accuracy of 2°.
| Model No: | Cube size | |
| CUB-CB-25-25 | 25 mm cube | |
| CUB-CB-25-15 | 15 mm cube |
Plate Beam Splitter Holder
25mm Plate beam splitters can be placed inside the cube using Plate beam splitter holder. Holder can be rotated manually with a positioning accuracy of 2° and can be locked by a set screw and allen key.
| Model No: | Cube size | |
| CUB-PB-25-25 | Dia-25 mm x 2 mm | |
| CUB-PB-25-15 | Dia-15 mm x 2mm |
Adapters
Fiber Connector
Fiber Chuck
Iris Diaphragm
Microscope Objective Adapter
Pin Hole Cell
Lens Cell
| Item | Model | Suitable Cage Plate / Type of cage plate | |
| Lens Cell | M-OP-LC25 | OP-UT-25 | |
| Filter Cell | M-OP-FL25 | OP-UT-25 | |
| M.O Adapter | M-OP-MO | OP-UT-25 | |
| FC Fiber Connector | M-OP-FC01 | OP-UT-25 | |
| Fiber Chuck | M-OP-FC02 | OP-UT-25 | |
| Pinhole Cell | M-OP-P H01 | OP-UT-25 | |
| Iris Diaphragms | M-OP-ID18 | OP-UT-25 |
Lens Cells and Lens Tubes
| Item | L1, L2 | Suitable Cage Plate / Type of cage plate | |
| LNST-CG-12.5 | 16.5 | OP-UT-25 | |
| LNST-CG-25 | 28 | OP-UT-25 | |
| LNST-CG-30 | 34 | OP-UT-25 | |
| LNST-CG-38 | 41 | OP-UT-25 |
Base Mounting Platform
Base mounting plate has M6 tapped holes at bottom for mounting on post or base.
| Model No: | |
| M-OP-BMP-M6 |
